Frame Assembly Instructions

Getting your puzzle into its custom frame is not as hard as it may first look.   Watch the video below or call us at 303-444-1442 and we will walk you through it.




  1. We recommend building the puzzle on a large piece of poster board or cardboard, or sliding it off the table you’ve used to complete the puzzle before framing.
  2. Peel the protective film off of both sides of each piece of glass.
  3. Slide your puzzle onto one piece of glass and place the second piece of glass on top of the puzzle.
  4. Place the puzzle (now between the two pieces of glass) on top of the puzzle box to lift it off of the table.
  5. Connect three adjacent sides of the metal frame using the provided hardware. (Make sure to use both a flat “L” piece and an “L” piece with screws at each corner to connect the edges.) Tighten the screws to ensure a tight fit.
  6. Slide the three assembled adjacent sides of metal rails onto the puzzle and glass.
  7. Attach the metal hardware to both ends of the fourth metal rail and slide it into the frame, completing the frame. Tighten the remaining screws.
  8. Snap in the included toothed hanger and enjoy!