Frame Assembly Instructions
Getting your puzzle into its custom frame is not as hard as it may first look. Watch the video below or call us at 303-444-1442 and we will walk you through it.
VIDEO INSTRUCTIONS:
FRAME ASSEMBLY INSTRUCTIONS:
- We recommend building the puzzle on a large piece of poster board or cardboard, or sliding it off the table you’ve used to complete the puzzle before framing.
- Peel the protective film off of both sides of each piece of glass.
- Slide your puzzle onto one piece of glass and place the second piece of glass on top of the puzzle.
- Place the puzzle (now between the two pieces of glass) on top of the puzzle box to lift it off of the table.
- Connect three adjacent sides of the metal frame using the provided hardware. (Make sure to use both a flat “L” piece and an “L” piece with screws at each corner to connect the edges.) Tighten the screws to ensure a tight fit.
- Slide the three assembled adjacent sides of metal rails onto the puzzle and glass.
- Attach the metal hardware to both ends of the fourth metal rail and slide it into the frame, completing the frame. Tighten the remaining screws.
- Snap in the included toothed hanger and enjoy!